Showing posts with label in. Show all posts
Showing posts with label in. Show all posts

Sunday, February 23, 2014

A New Frenchie in Black and Gold!

I came across this vintage Thomasville dresser and nightstand. Now, it wasnt horrible, just 
a bit dated. Everyone always does white and gray or combos of said colors. I wanted to try
something different. 
                           I went with black, a very soft, light gray and gold. Love it how it finished up!

The tops on these are that laminate type of paint. I really dont know what its called. 
 I wanted to see what the wood top was like, but wasnt one of those nice enough to refinish.


BTW, here is a pic of its partner night stand that I had done in my own "Elvis Presley" blue. I had seen one done very similar to this over at "Thee Velvet Glove". I loved how hers came out so I just had to try this color! 
I made up my own chalk paints. Since its not like ASCP (no prepping needed) I did quite a bit
of sanding and priming, just to be on the safe side. In fact, that laminate white-yellow paint that 
was on the drawers was a pain in the bum!  Places where I didnt sand it off well enough didnt provide the adhesion for the black paint.  Just when I thought I was done w/the drawers I had to sand off all of my freshly painted black and re-sand the original paint off completely. Then, prime and re-paint the black and wax it,,,,again! Nothing like duplication of work.  Really love it.  uh-huh.  This is where you ASCP people say "See? This is why you dont make your own." Well, yes and no. I admit, ASCP is so easy. However, she doesnt have a true black. Graphite is, well, graphite, not a deep, inky black. 
So, a trade-off is sometimes necessary. 
 I used Martha Stewarts metallic gold paint. And a gold spray metallic on the handles. 
 This was by far the most time consuming paint job! Took me forever because of the
 3 different colors. I had to keep doing touch-ups. All the gold edging on the drawer fronts were done by hand with a small brush. 2-3 coats. The gray took numerous coats too. Once I would sand, I saw bare spots and would do touch-ups. Ditto with the black paint! Oy. I thought I would never finish!
I think on a few of the drawers I taped and then sprayed the molding part with a gold spray paint.
I figured it would be easier to get a good base and then just do a touch up with a small brush
and the MS metallic paint. However, as you can see, the taping off part was not a fun party.
No-siree-Bob! Wayyyyy too much extra effort. It didnt matter what I did, it was going to be
time consuming. And it was.
Close-up of the detail work on the drawer front.



Putting a nice finish on black chalk paint can be tricky. Ive found that using a steel wool
to lightly smooth and sand is better than a harsher grit. And using the steel wool to buff the wax
off puts on a nice sheen.

 In hindsight, I probably just should have gone with an enamel. 
But I did want some light distressing. I used a wipe on urethane on top, sanded 
with steel wool, and then used numerous coats of paste wax. The top is smooth as silk!
Same view, taken during day and night. 


Linking up at my fave parties!! :
Kammys Korner - Trash to Treasure Tuesdays
Domestically Speaking - The Power of Paint Party
Stacey Embracing Change - Thursday 
Miss Mustardseed - Furniture Feature Friday
Redoux - Friday Link Up Party
Funky Junk Interiors - Saturday Night Special
Knick of Time Interiors - Knick of Time Tuesday
Tuesday-Elizabeth and Co., My uncommon Slice of Suburbia,
Savvy Southern Style. Weds, Beyond the Picket Fence, PJH Designs
From my Front Porch to Yours,  The 36th Avenue,
Monday-Between Naps on the Porch, The Dedicated House,
My RePurposed Life, No Minimalist Here-Thurs.    
Under the Table and Dreaming-Sunday Party
Remodelaholic,  MinettesMaze-Sun party
 
Home Stories A To ZToday’s Creative Blog
Tip JunkieNifty Thrifty Tuesday
Thrifty Decor Chick
The Scoop
From My Front Porch To Yours
The Brambleberry CottageNo Minimalist HereThe Shabby Creek Cottage
Redoux InteriorsThe 36th Avenue
Jennifer RizzoMiss Mustard Seed
Funky Junk InteriorsTatertots & Jello
Be Different Act Normal
The DIY ShowoffNifty Thrifty Things



                                   

Read More..

Tuesday, February 4, 2014

A House In The Trees Part I

My wife and I have three (3) sons, ages 7, 7 and 3. They destroy a room in a matter of minutes when they “play.” Luckily, the basement is finished and serves as a playroom. We can shut the door and the mess goes away. Unfortunately, the noise doesn’t go away. Since the weather turned last fall, we’ve been eagerly awaiting the day when we can send them outside to play. As an incentive to get out of the house, we decided that it was time to build the tree house.

When she thought it was time to start building, my wife brought the Black & Decker The Complete Guide: Build Your Kids a Treehouse home from the library. I went through it with a slight skepticism. I can’t say I’d trust a Black & Decker branded book to be all that good at any topic. While I feel my initial skepticism stands regarding the book’s production values, I was pleasantly surprised by the book’s technical information, especially its section on attaching to the trees.

I knew that when attaching to the trees it would be important to properly support the tree house, not kill the tree and allow tree house and tree to move independent of each other. The Platform Ancoring Techniques section was fantastic. It reviewed the entire anchoring process. After reviewing the section multiple times, I thought the solution would be the commercially available Garnier Limb anchors they mention. Unfortunately, when the anchor and associated bracket are priced out, it comes to $125.00 per attachment point (plus the special drill bit you need to rent or buy). This was more than we were willing to spend, so I set about building my own.

The Garnier Limb from treehouses.com
Since I couldn’t source such big bolts at the local hardware store, I began by ordering some ¾” x 10” galvanized lag bolts from McMaster-Carr. In order to transform these into homemade Garnier Limbs, I added two (2) galvanized washers and a length of ¾” galvanized pipe between them. After they were assembled, I think the homemade bolts came out pretty well.
The 3/4" x 10" galvanized bolt.

The washers and 3/4" galvanized pipe ferrule installed to form my
homemade mounting bolt.
Im using commercially available post straps from Home Depot as the
bracket that will attach the joist to the mounting bolt while allowing
bi-directional movement.
Before installing the bolts, I glues together double 2x8 joists to form the perimeter of the platform. One laminated joist each at 10’, 12’ and 16’ long.
Gluing the joists.
In order to install them, I first picked and marked a height on the first tree (I was not particular about the exact height, as long as I could walk under the tree house). Using my right angle drill and a 9/16” auger bit, the 6” deep hole was easy.
This drill is one of my absolute favorite tools.
Then I set up my laser level and transferred the height to the remaining two (2) trees. Since it was getting late I decided to drill the second hole in the first tree and see if I could get the anchors installed. After drilling the second hole just like the first, I started ratcheting in the bolt.
Thats as far in as I could get, using a 9/16" pilot hole.
It was about 2” in to ratcheting in that first bold that I realized a 9/16” clearance hole was too damn small for a ¾” bolt. I drilled out both holes to ⅝” and both bolts when in like champs.
Finally, a rock solid anchor bolt.
With the joists glued up, the first two (2) bolts in and the other trees marked I called it a night. More tree house building to come. In the mean time, heres a quick video showing the bi-directional movement of the mounting bracket system Im using.


Read More..

Monday, February 3, 2014

Today woodworking 10 in 1 smithy supershop

For you woodworking 10 in 1 smithy supershop its good

Woodworking 10 In 1 Smithy Supershop

10-in-1 woodworking machine item # 96067 - bt3central forums, Can't be positive it's the same machine, but it sure looks like, and matches specs of the supershop, one of several machines made by smithy: http://www.smithy.com. Youtube, If the owner of this video has granted you access, please log in.. Smithy - small shop machine tools | smithy.com, Search . 1 2 3. cnc 1240 bed mill. cnc 1240 bed mill; overview; models and prices.

Turning, Buy with confidence - smithy tooling is quality-built to match the needs of small shop machinists.. Milling, Buy with confidence - smithy tooling is quality-built to match the needs of small shop machinists.. Midas accessories - click each category for accessory, Items in your cart. your shopping cart is currently empty; subtotal $0.00 cnc 1240 bed mill. cnc 1240 bed mill; overview; models and prices.

Shopsmith tool hunter. find shopsmith mark v, 10er, Shopsmith tool hunter. find shopsmith mark v, 10er, bandsaws, jointers & more! click for home page. Is shopsmith breathing its final breath? — woodworking, A while back, in a previous post, i talked about the news that shopsmith was in financial trouble. the news today confirms it. robert folkerth, the president was. Chestnut - wikipedia, the free encyclopedia, The chestnut group is a genus (castanea) of eight or nine species of deciduous trees and shrubs in the beech family fagaceae, native to temperate regions of the.



woodworking 10 in 1 smithy supershop




woodworking 10 in 1 smithy supershop
,

10 out of 10 based on 65 ratings
Read More..

Tuesday, January 7, 2014

Project plan in woodworking

Popular Project plan in woodworking one of the best

Woodcraft - woodworking plans & tools | fine woodworking, Woodcraft offers over 20,000 woodworking tools, woodworking plans, woodworking supplies for the passionate woodworker.. Free woodworking plans, projects and patterns at, Free woodworking plans and easy free woodworking projects added and updated every day. use our rss feed to keep up-to-date on the latest free woodworking information..

Woodworking Projects and Free Woodworking Plans for all woodworkers

Woodworking plans, projects, & patterns - diy network, Discover woodworking tips, ideas and how-to projects from diy network. Woodworking - free woodworking plans, power tool reviews, Free woodworking plans and reviews of woodworking tools and machinery, plus woodworking tips from making your own jigs to safety in the woodshop. find free plans for.

Woodworking - free woodworking plans, power tool reviews, Free woodworking plans and reviews of woodworking tools and machinery, plus woodworking tips from making your own jigs to safety in the woodshop. find free plans for. Fine woodworking - official site, Expert advice on woodworking and furniture making, with thousands of how-to videos, step-by-step articles, project plans, photo galleries, tool reviews, blogs, and more.. Ana white | free and easy diy furniture plans to save you money, Free plans to help anyone build simple, stylish furniture at large discounts from retail furniture. all woodworking plans are step by step, and include table plans. Woodworkers workshop - free woodworking plans information from, Free woodworking plans and projects search engine. top searches include free woodworking plans for easter, christmas, valentine, picnic, free, router tables, gun. Minwax - wood projects are simply not complete without minwax!, Minwax offers wood stains, wood finishes, wood conditioners, wood fillers, wood cleaners & more for your woodworking projects.. House plans at family home plans, We market the top house plans, home plans, garage plans, duplex and multiplex plans, shed plans, deck plans, and floor plans. we provide free plan modification quotes..

 Woodworking Projects With a Plan | Woodworking Projects & Woodworking


Woodworking Projects With a Plan | Woodworking Projects & Woodworking

Great Woodworking Plans For Home Projects ~ flaming-skulls-and


Great Woodworking Plans For Home Projects ~ flaming-skulls-and

Woodworking Projects and Free Woodworking Plans for all woodworkers


Woodworking Projects and Free Woodworking Plans for all woodworkers

Read More..